Search

Products Categories
Contact Us

Address: Changchun Road 11 National University Science Park Development Five Floor A Block 1103, Zhengzhou, Henan
Contact: Shao man
Mob: 86-13613801611
Tel: 86-371-86038278
Email: admin@toolshnhongxiang.net

Diamond Lapping Paste

APPLICATION SCOPE: Synthetic diamond abrasive paste is a kind of soft abrasive paste made of selected high-quality diamond micro-powder and paste binder, colorant, preservative, flavor and so on. The diamond powder has high strength and uniform particle size grinding effect. The diamond is......

Send Inquiry

APPLICATION SCOPE:
Synthetic diamond abrasive paste is a kind of soft abrasive paste made of selected high-quality diamond micro-powder and paste binder, colorant, preservative, flavor and so on. The diamond powder has high strength and uniform particle size grinding effect. The diamond is evenly distributed in the paste carrier and has a self-lubricating function.
Suitable for grinding, polishing and processing of high-precision workpieces such as glass, ceramics, gemstones, hard alloys, etc. Also suitable for profiled workpieces made from the above materials that are difficult to machine with abrasive tools.

研磨膏1.jpg

PRODUCT ADVANTAGES:
Application range:
It is mainly used for grinding and polishing of high-grade materials, grinding tools such as glass, ceramics, gemstones, hard alloys, tungsten steels, etc., super-hard material measuring tools and tools, seals and high-gloss finishes, optical molds, injection molds, etc.
Oil-soluble grinding paste has good wettability, grinding force, and low grinding heat. It is mainly used for machining high hard alloys such as high-hardness alloy parts, instruments and meters, measuring tools, cutting tools, and grinding tools.
The water-soluble abrasive paste has small viscosity, easy cutting, and high processing efficiency. It is mainly used for the processing of slightly corrosive metals, circuit boards, glass, ceramics, precious stones, agate, and other non-metallic hard and brittle materials.
Grinding and polishing of tungsten steel molds, optical molds, injection molds, etc. Grinding and polishing in the metallographic analysis experiment process; grinding and polishing of dental materials (dentures); grinding and polishing of jewelry and jade crafts; optical lenses, hard glass and crystals, superhard Grinding and polishing of ceramics and alloys.

SIZE:

Grit (um)ConcentrationApplication Effect
W0.25TOPB-600Super mirror of brightness
W0.5TOPB-280
W1TOPB-140
W1.5TOPB-120
W2TOPB-100
W3TOPB-080
W4.5TOPB-050Precision Brightness
W6TOPB-030
W8TOPB-020
W9TOPB-018
W13TOPB-015Common Brightness
W15TOPB-012
W17.5TOPB-010
W25TOPB-008Rough Brightness
W35TOPB-006
W50TOPB-004

DETAILS: 
Abrasive rolling during the grinding process, resulting in both the role of extrusion and cutting, so that the surface is gradually smooth convex and concave, also applies to manual polishing, suitable for low hardness samples. Metallographic sample materials with irregular surfaces (grooves, etc.) can be quickly polished for ease of use.
Appropriate grinding device and abrasive paste are selected according to the requirements of the workpiece material and the finish. Dilution with water or glycerin when using the abrasive paste, the proportion of which is according to production needs, generally water: paste = 1:1. Dilution should be constantly stirring, slowly adding water or glycerol, careful caking, if the agglomerate can be hot to 80 until it disappears.

研磨膏.jpg

FAQ & PRECAUGIONS:
1. According to the workpiece material and processing requirements, select the appropriate grinding device and abrasive paste. The commonly used grinders are blocks and plates made of glass, cast iron steel, aluminum, plexiglass, etc., and thinners are water-soluble abrasives with water or glycerin.
2. Diamond grinding is a kind of precision processing. The environment and tools are required to be clean and clean during processing. The tools used are required for each particle size and must not be mixed.
3. The workpiece must be clean and clear before changing the grinding paste with different particle sizes in the process so as to avoid the coarse particles of the previous process being mixed into the fine-grained abrasive paste to scratch the workpiece.
4. When using, squeeze a small amount of abrasive paste into the container or directly squeeze it on the grinding device and dilute it with water, glycerin or kerosene. The proportion of general water paste is: 1:1, and it can also be adjusted according to the site use conditions. The finest particles are only A small amount of water needs to be added, and an appropriate amount of glycerol is added as the particle size increases.
5. After the grinding is completed, the workpiece should be cleaned with gasoline, kerosene or water.
6, transport, storage can not be squeezed.
7, storage room temperature should be about 20 °C.
8, stored in a sanitary, cool, dry place.

Hot Tags: diamond lapping paste, China, manufacturers, suppliers, factory, wholesale, customized, price, quotation, in stock, made in China
Related Products